EMBEDDED SYSTEMS LABORATORY:
The objective of the laboratory to build the practical exposure in the areas of Embedded Systems .Embedded systems lab is equipped with 26 PCs along with one server, software packages, embedded processor development modules with multiple user license and manuals. This lab is ergonomically designed for the courses Embedded system laboratory-I, Embedded system laboratory-II
Softwares:
The available software packages include MP Lab, Modelsim, Keil software for PIC and ARM processor, RTOS and target boards. Also, Xilinx Software for CPLD, FPGA (SPARTAN3E, SPARTAN 6).
Major Equipments:
• VLSI TRAINER KIT
• EMBEDDED TRAINER KIT
• DSP KITS BASED ON TMS 320C6713
• DSP KITS BASED ON TMS 320C5416
• UNIVERSAL PROGRAMMER
• RTOS LEARNER KIT
• VHDL / VERILOG TRAINER KIT
• ARM PROCESSOR TRAINER KIT
ELECTRICAL MACHINES LABORATORY
The objective of the lab is to expertise the students about DC machines, Transformers, synchronous machines and induction motors and gives them experimental skills. The experiments conducted on different types of machines enable students to practically see the operation and characteristics of the machines and their suitability for different applications. The Laboratory is equipped with conventional and modern Electrical and Electronics measuring equipments, various AC and DC Electrical Machines and Transformers. The lab has 22 working tables with single phase and three phase connection for conducting experiments. This lab is ergonomically designed for the courses Electrical Machines Laboratory – I, Electrical Machines Laboratory - II
Major Equipments:
• Dc Shunt Motor coupled With Salient Pole Alternator
• Dc Shunt Motor coupled With Non-Salient Pole Alternator
• Dc Shunt Motor coupled With Shunt Generator
• Dc Shunt Motor coupled With Compound Generator
• Dc Shunt Motor coupled With Dc Shunt Generator
• Dc Shunt Coupled With Dc Series Generator
• Dc Compound Motor With Loading Arrangement
• Dc Shunt Motor With Loading Arrangement
• Dc Series Motor With Loading Arrangement
• Auto Synchronous Motor
• Dc Shunt Motor With Loading Arrangement With Three Point Starter
• Slip Ring Induction Motor With Rotor Resistance Starter
• Ac Panel Board
• Dc Panel Board
• Rectifier – Thyristor Model
• Water Load
ELECTRICAL DRIVES AND CONTROL LABORATORY
Electric Drives and control Laboratory consists of different power electronic drives equipment with different controllers like TMS320F2407, PLC, (SPARTAN)FPGA, DSPIC4011 for controlling AC, DC and special machines likeSRM ,BLDC for conducting experiments relevant to electric drives and control lab.The lab has 8 working tables with single phase and three phase connection for conducting experiments. This lab is conveniently designed for the courses Microprocessor and Microcontroller Laboratory.
Major Equipments:
• Brush Less DC(BLDC) Motor Spring Balance Load setup with Hall sensor
• PLC based Drives for Induction Motor setup
• TMS320F2407 DSP Controller for speed control of AC & DC Motor
• DSPIC4011 Controller for speed control of Brush Less DC(BLDC)
MICROPROCESSOR AND MICROCONTROLLER LABORATORY
The objective of laboratory is to enhance the students programming skill on 8085,8086 microprocessor & 8051 microcontrollers for different applications. In this laboratory, the students undergo training on interfacing of input/output devices like stepper motor interface, traffic light controller etc.
Major Equipments:
• 8085 Microprocessor Trainer kits
• 8086 Microprocessor Trainer kits
• 8051 Microcontroller trainer kits
• Interface Board
ELECTRONIC DESIGN LABORATORY
Electronic Design Laboratory consists of different equipment's for designing the various electronic components. The lab has 8 working tables with single phase and three phase connection for conducting experiments. This lab is conveniently designed for the courses Electric Circuits Laboratory,project laboratory.
Major Equipments:
• Constant Voltage Dc Power Supply Modules
• Variable Voltage Dc Power Supply Modules
• Electro Magnetic Relay Circuit Interface
• Optocoupler Circuit Interface
• Domestic Ups Modules
ELECTRIC CIRCUITS LABORATORY
Electrical Circuits Laboratory mainly focuses on basic electrical circuits designing and study of different laws like ohm's law, Kirchhoff's law etc.
Major Equipments:
• DC Regulated Power Supply
• Single tuned Coupled Circuit Kit
• RLC Trainer kit
• Self and mutual Inductance kit
• Function Generator
• Cathode ray oscilloscope
EEE COMPUTER LABORATORY:
The objective of this computer centre is to provide computational environment for the academic and research scholars of the Institute. The centre is enhanced with various technical softwares like MATLAB to carry out design and simulation of Electrical and Electronics circuits. The centre is equipped with high configuration systems which help to conduct training for faculty and student.EEE computer lab has been equipped with 68 personal computers, 1 Server system and printers with 15 KVA UPS support. All nodes are interconnected by LAN for high speed data sharing and internet connection from the centralized server. This lab is conveniently designed for Power System Simulation and Renewable energy Systems, Discrete Time Signal Processing, etc.
Major Equipments:
• Personal Computers (Intel Core 2 Duo, 2GB RAM, 80GB HDD)
• Personal Computers (Intel Core i3, 2GB RAM, 320GB HDD)
• IBM Server (Intel Xeon Processor, 256MB RAM, 73GB HDD)
• Printer (Monochrome Laser)
• Printer (Dot Matrix)
• Network Switch
POWER ELECTRONICS LABATORY:
This lab addresses issues related to energy conservation, alternate energy systems, zero energy buildings and locomotion. Alternate energy systems, power converters, PWM techniques and AC motor drives. Experiments and projects in this lab include multilevel inverter topologies and control for high power drives. This lab is ergonomically designed for the courses Power Electronics and Drives Laboratory, Control Systems and Instrumentation Laboratory
Major Equipments:
• IGBT based 3 phase PWM Inverter Module
• Power Scope
• Three phase Half and Fully Controlled Converter
• Resonant DC to DC Converter Module
• Cathode Ray Oscilloscope
• Digital Storage Oscilloscope
• Power Quality Analyser
• IGBT based four Quadrant Chopper Module
• IGBT based Single Phase PWM Inverter Module
• 5.0 KVA SCVS Transformer 140-260/230V AC
• Step Up/ Step Down Chopper using MOSFET
• SCR Single Phase Series Inverter Module
• LCR Q Bridge
• Single Phase Cyclo-Converter Module
• SCR Half and Fully Controlled Converter Module
• Single Phase Parallel Inverter Module
• SCR DC Voltage/Current Commutation Chopper Module
• Three phase 1KVA Isolation Transformer
• AC Phase Control using SCR,TRIAC and DIAC
• SCR,MOSFET,IGBT Characteristics Study Module
• PMDC motor
• UJT,R,RC firing circuit using SCR
• SCR Based Single Phase AC Phase Controller
• TRIAC Based Single Phase AC Phase Controller
• Transient Characteristics of SCR and MOSFET Module
• Universal Motor
MEASUREMENT AND INSTRUMENTATION LABATORY:
The Measurements and Instrumentation lab is equipped with CROs, Digital Storage Oscilloscopes, various trainer kits to measure power and energy, torque, angle, temperature, pressure, fluid flow, strain, iron loss,etc., and measuring instruments, signal generators, digital multimeters and loading inductor,capacitor,resistive loads and energy meter.
Major Equipments:
• Digital Storage Oscilloscope (40 MHZ)
• Three Phase Energy Meter Testing Kit
• Measurement of Iron loss and Ring Specimen Module
• Torque Measurement Trainer Kit
• Sine Wave Generator (20 MHZ)
• PLC Trainer Kit
• Temperature Measurement Trainer Kit
• Single Phase Energy Meter Testing Kit
• Instrumentation Amplifier Trainer Kit
• Current Transformer Calibration Module
• Schering Bridge Setup.
• A/D and D/A Converter Trainer Kit.
• Angle Measurement Trainer Kit
• AC Bridge [Maxwell's inductance]
• DC Bridge's[Wheatstone bridge, Kelvin's double bridge]
• Transients Trainer Kit
CONTROL SYSTEM LABORATORY
Control System laboratory facilitates the students to design any mathematical model of the electrical system and to simulate linear and nonlinear systems using MATLAB simulation tool. This lab is ergonomically designed for the courses, Electron Devices and Circuits Laboratory, Linear and Digital Integrated Circuits Laboratory, Control Systems and Instrumentation Laboratory
Major Equipments:
• Transfer Function of DC Machines Trainer Kit
• Stepper Motor and its Control Trainer Kit
• Transfer function of AC Servo motor Trainer kit
• Frequency Response of Lag Lead Networks Trainer kit
• Transfer Function of Ward-Leonard method of speed control of DC Motor
• DC position control System Module
• P,PI and PID Controller Module
• Process Control Simulator
• Synchronous Module
• Transducers Module
• Angular Displacement
• CRO
• Digital Multimeter
• Linear System Simulator Trainer Kit
• Transfer Function of DC Servo Motor Module
• Digital Storage Oscilloscope
• Digital IC Trainer Kits
• Digital IC Tester
• Analog IC Tester
• Function Generator
• Fixed Power Supply
• DC Regulated Power Supply (0-30)V
• DC Dual Regulated Power Supply (0-30)V
• Analog DC Voltmeters
• Analog DC Ammeters
LINEAR AND DIGITAL INTEGRATED CIRCUITS LABATORY
Linear and Digital Integrated Circuits laboratory provides an opportunity to learn the basic characteristics of the design of digital and analog circuits.
Major Equipments:
• Digital IC Trainer Kit
• Fixed Power Supply (+5V,+12V,−12V)
• Function Generator (3 MHz)
• Cathode Ray Oscilloscope (30MHz)
• Analog and Digital IC Tester
• Digital Storage Oscilloscope (50 MHz)
ENGINEERING PRACTICES LABORATORY
The objective of the Engineering Practice is to equip the students in the area of different engineering streams like Electrical and Electronics Engineering.
The main focus in the Electrical area is to be aware of the essential safety concepts in House hold wiring and Energy measurements in electrical equipments.
Students will learn the concepts about various components and its identification, soldering practice, bread board connections and also familiarization of equipments in the Electronics area.
List of Major Equipments:
• Earth Tester
• Single phase auto transformer
• Function Generator
• Digital Multi meter
• Portable Ammeter
• Panel meter
• Portable Voltmeter
• Portable Wattmeter
• Digital Range Finder
• Portable hand driven Megger
• Single Phase Energy Meter
• Digital Live Wire Detector
• Cathode Ray Oscilloscope
• Regulated Power Supply